Ammo Mig A-STAND Aqua Gloss Clear

A-STAND Aqua Gloss Acrylic Varnish

The A-Stand range also includes the Aqua Gloss acrylic varnish, ideal for protecting all types of paint before applying decals or enamel and acrylic weathering products. It dries very quickly, after 1 hour you will be able to work safely over the application, however maximum resistance is achieved after 24 hours. This varnish can be diluted with water.

Why to use A-Stand?

The excellent fluidity of A-Stand products makes them easy to spray without clogging the airbrush. They also provide a tough and durable finish once dry, allowing the application of any other lacquer, enamel weathering products, or acrylic paint on top without issue. In addition, modelling masking tape can be applied over the hard finish of the A-Stand paints with no problem.

A-Stand products dry to the touch in a short period of time of approximately 30 minutes, depending on the amount of paint applied, ambient humidity and temperature. Allow 1 hour of drying time before the applying other products safely, they will completely cure in 24 hours. The thinner used in these paints and varnishes, like in other lacquer products, are only suitable for airbrush use, not for brush painting.

Remember that all lacquer paints contain toxic components and it is advisable to use a mask for its application, and to spray these products in a well-ventilated area.

The A-Stand paint series includes various lines of products used to apply a range of effects and finishes on your models.

Always clean and dilute with A-Stand Airbrush Thinner & Cleaner A.MIG-2013